Solenoids

Edelbrock Ford Coyote 5.0L Pro-Flo 4 Plus Knock Sensor Harness - 36125

When choosing to upgrade your engine to modern fuel injection, look no further than Edelbrock's Pro-Flo 4 EFI systems. Edelbrock has been delivering the best combination of dyno proven electronic fuel injection performance for over 40 years. Pro-Flo 4 is...

Edelbrock 2 Bar Map Sensor w/ 1/8 -27 NPT - 36020

The Edelbrock #36020 Pro-Tuner EFI Pressure Sensors are intended to be used with Edelbrock's Pro-Tuner EFI system, but may be used with other systems using the supplied connector and wiring. They are configurable to most aftermarket ECUs. If you are...

Edelbrock 1 Bar Delco Manifold Absolute Pressure (Map) Sensor - 36019

Edelbrock Manifold Absolute Pressure Sensor is used in our #7118 Performer RPM LS1 Manifold as well as the Edelbrock E-Street, Pro-Flo 2, Pro-Flo 3 & Pro-Flo 4 Systems.

Edelbrock Throttle Position Sensor - 36018

The Edelbrock #36018 Throttle Position Sensor can be used on the Competition Throttle Bodies (Universal 4-barrel Throttle Bodies). The Edelbrock #36018 Throttle Position Sensor is a service item to support the Edelbrock line of throttle bodies and EFI...

Edelbrock Idle Air Control Valve (Iac) And Gasket (Hitachi) - 36017

Edelbrock Idle Air Control Valve (Iac) And Gasket (Hitachi)

Edelbrock GM Stepper Iac Motor - 36015

Idle Air Control Valve #36015 GM Stepper Type

Edelbrock Oxygen Sensor 4-Wire Switching - 36013

The Edelbrock #36013 is a Replacement Bosch 4-wire switching, Narrow-Band Oxygen Sensor for ProFlo2, ProFlo2/XT, and Pro-Tuner EFI Systems.

Edelbrock DeLPHi Fluid Temperature Sensor - 36012

Edelbrock part #36012 Coolant Temp Sensor for E-Street and Pro-Flo 3 & Pro-Flo 4 systems. This Delphi Temperature Sensor designed for measurement of coolant, oil and other automotive fluids. It has 3/8-18 NPT threads with thread sealant pre-applied and...

Edelbrock EFI 02 Sensor and Bung - 3591

The Edelbrock #3591 is a Replacement Narrow-Band Oxygen Sensor For ProFlo1 (#3500 Series) EFI Systems. It is a Bosch 3-Wire, Heated Sensor. It includes Replacement O2 Sensor and Weld-In Bung.

Edelbrock EFI Coolant Temp Sensor - 3589

Edelbrock part #3589 Pro-Flo EFI replacement coolant temperature sensor is available for Pro-Flo and Pro-Flo XT EFI systems, Brass, Natural, 3/8 in. NPT Thread Size.

Edelbrock EFI Air Temp Sensor - 3588

The Edelbrock #3588 Air Temp Sensor with 3/8"-18 NPT threads. This Edelbrock #36018 Threaded Air Temp Sensor has a range from -40 to 284 Deg Fahrenheit.

Edelbrock EFI Map Sensor - 3587

Edelbrock Manifold Absolute Pressure Sensor is for use with first generation Edelbrock Pro-Flo EFI systems.

Edelbrock EFI Pump Relay - 3586

Edelbrock part #3586 Pro-Flo EFI Fuel Pump Relay. Edelbrock Pro-Flo fuel pump relays can help restore proper function to your Pro-Flo EFI system so that it can perform its optimum best

Edelbrock Air Temperature Sensor and Grommet - 3578

The Edelbrock #3578 Air Temp Sensor is for push in connections. This Edelbrock #36018 Air Temp Sensor includes a rubber grommet and has a range from -40 to 284 Deg Fahrenheit.

Edelbrock Sensor Fuel 1/8-27 NPT Pro-Flo 3 - 3546

Edelbrock part #3546 for Pro-Flo 3 Fuel Sensor, It includes a 1/8-27 NPT fuel pressure sensor with a -6 AN fuel pressure take-off fitting

Edelbrock Spark Plug Wire Separators (SK005007) - Set of 6 - 22799

Edelbrock Wire Separator Kit #22799 will organize spark plug wires on 4-, 6- and 8-cylinder engines and includes six separators (two 2-wire, two 3-wire and two 4-wire) designed to work with wire diameters up to 8.5mm. Edelbrock Separators are constructed...

Edelbrock Ford Modular 2V High Output Coil-On-Plug (COP) - 22744

Edelbrock part #22744 Max-Fire Coil-On-Plug ignition coil pack is for use with 1997-2014 Ford 4.6L, 5.4L and 6.8L engines with 2-valve cylinder heads. It's a direct bolt-on with OEM DIS electronic controls and aftermarket high performance ignition...

Edelbrock Mass Air Flow Sensor Kit Universal Ford - 15402

Edelbrock Part #15402 Mass airflow Sensor Kit for Ford Universal Applications, increases the airflow to 113 lbs. per minute. Both kits utilize a large 95mm venturi style housing that reduces airflow restriction and improves the overall horsepower...

Edelbrock Mass Air Flow Sensor Kit Universal Gm - 15401

Edelbrock Part #15401 Mass airflow Sensor Kit for GM Universal Applications, 95mm venturi style housing that reduces airflow restriction and improves the overall horsepower potential. These sensors feature an injection molded housing for OEM level...

Snow Performance Hi-Flow Water Solenoid Upgd. 4AN Fittings (Systems w/ 4AN SS Braid Line) - SNO-40060-BRD

The Snow Performance High Flow Solenoid offers 100% safety for all injection systems utilizing rear mounted reservoirs, injection points under vacuum, or installs where the injection nozzle is lower than the water-methanol tank. The solenoid fits in line...

Snow Performance Solenoid Upgrade - SNO-40060

The Snow Performance High Flow Solenoid offers 100% safety for all injection systems utilizing rear mounted reservoirs, injection points under vacuum, or installs where the injection nozzle is lower than the water-methanol tank. The solenoid fits in line...

Skunk2 K-Series VTEC Black Block Off Solenoid - 639-05-0705

The Skunk2 Racing VTEC Solenoid Block-Off replaces the factory spool valve assembly for the K20 and K24 K Series engines. The block-off plate is used when the VTEC function is no longer active; commonly refereed to as VTEC KILLER set ups.This Part...

Skunk2 K-Series VTC Black Block Off Solenoid - 639-05-0505

The Skunk2 Racing VTC Solenoid Delete is CNC machined from 6061 billet aluminum and replaces the OEM VTC solenoid on K20 and K24 K Series engines that have replaced the OEM hydraulic intake cam gear for a mechanically adjustable Skunk2 race intake cam...

Skunk2 K-Series VTC Raw Block Off Solenoid - 639-05-0500

The Skunk2 Racing VTC Solenoid Delete is CNC machined from 6061 billet aluminum and replaces the OEM VTC solenoid on K20 and K24 K Series engines that have replaced the OEM hydraulic intake cam gear for a mechanically adjustable Skunk2 race intake cam...