Steeda Mustang Strut Tower Cutting Tool (2015-2023)

Steeda Mustang Strut Tower Cutting Tool (2015-2023)

Steeda's strut tower cutting tool allows you to take full advantage of your Steeda camber plates and dial in extreme negative camber without hacking up your strut towers and having to remove your struts. Even after installing a Steeda camber plate, interference between the strut nut and strut tower can prevent you from reaching the alignment specs you need, making it necessary to open up the hole diameter in the strut tower to achieve the handling performance you're after.

Steeda's tool design uses a premium grade metal cutting hole saw to produce a perfectly concentric hole centered on the factory original rather than notching the strut tower with a cut-off wheel or die grinder. The clean cut can be deburred with fine sandpaper and finished with touch-up paint for a near-identical appearance to stock. The kit's Delrin guide plug fits over OE and most aftermarket strut nuts and provides perfect self-alignment, eliminating the need for a 1/4" pilot bit that can snap mid-cut. The 2-3/4" hole saw is universally compatible with most hole saw arbors with a threaded 5/8"-18 inner diameter.

Note: This is a non-returnable, no-warranty consumable tool. The hole saw will dull with multiple uses and the Delrin pilot plug will wear over time by design. Use slow drill RPM, moderate pressure, and cutting oil to maximize tool life.

Product Benefits:

Self-centering design for the cleanest cut possible
Metal-cutting specific blade for the cleanest and fastest cut
Allows for extreme alignment specs
Strut removal not required in most cases