Camaro 1970-1981

COMP Cams Valve Spring 1.250in Outer W/D - 980-1

COMP Cams Valve Spring 1.250in Outer W/D

COMP Cams Sportsman Solid Roller Lifter Set w/ Bushing for Chevrolet Big Block - 96998B-16

Sportsman Lifters from COMP Cams are designed to be a premium and lighter weight upgrade over Endure-X Lifters and a value alternative to the Elite Race option. Sportsman Lifters are offered in two configurations: a standard/traditional needle bearing...

COMP Cams Roller Lifters CB .160in Offset Needle Bearing - 96996-16

Sportsman Lifters from COMP Cams are designed to be a premium and lighter weight upgrade over Endure-X Lifters and a value alternative to the Elite Race option. Sportsman Lifters are offered in two configurations: a standard/traditional needle bearing...

COMP Cams Lifter Sportman CS 0.842 Center / Center Bushed - 96818B-16

Sportsman Lifters from COMP Cams are designed to be a premium and lighter weight upgrade over Endure-X Lifters and a value alternative to the Elite Race option. Sportsman Lifters are offered in two configurations: a standard/traditional needle bearing...

COMP Cams Valve Spring 1.550in 2 Spring - 930-1

Race Street 1.550" OD Dual Spring; 1.900" Installed Height; 1 Spring

COMP Cams Valve Springs 1.525in Outer W/ - 911-16

COMP Cams Valve Springs 1.525in Outer W/

COMP Cams Valve Spring 1.525in Outer W/D - 911-1

COMP Cams Valve Spring 1.525in Outer W/D

COMP Cams ROLer LifterCB .300 Tall Cuta - 8996-16

Endure-X Solid Roller Lifter Set for Chevrolet Big Block

COMP Cams LifterTool Steel.842in Uncoate - 89842H-1

Constructed from tool steel, which is lighter than standard steel, this non-coated lifter fits .842" diameter Chevrolet applications with cast iron camshafts. Features an EDM oiling hole for additional oiling to camshaft lobe.

COMP Cams Solid LifterTool Steel .842in - 89842C-16

Constructed from tool steel, which is lighter than standard steel, these DLC-coated lifters fit .842" diameter Chevrolet applications with steel camshafts.

COMP Cams Solid LifterTool Steel .842in - 89842C-1

Constructed from tool steel, which is lighter than standard steel, this DLC-coated lifter fits .842" diameter Chevrolet applications with steel camshafts.

COMP Cams LifterTool Steel.842in Uncoate - 89842-16

Constructed from tool steel, which is lighter than standard steel, these non-coated lifters fit .842" diameter Chevrolet applications with cast iron camshafts.

COMP Cams LifterTool Steel.842in Uncoate - 89842-1

Constructed from tool steel, which is lighter than standard steel, this non-coated lifter fits .842" diameter Chevrolet applications with cast iron camshafts.

COMP Cams Link Bar For .300 Tall Roller - 873-L

Roller Lifter Link Bar for Chevrolet Big Block w/ .300" Tall Lifters

COMP Cams Pro-Mag Hydr Lifters Chevy SB - 858-16

These Pro Magnum hydraulic lifters are designed to perform at high RPM without any harmful pumping up. These lifters for Chevrolet Small/Big Block and 348-409 yield significant power increase over standard hydraulic lifters.

COMP Cams Pro-Mag Hydr Lifters Chvy 90De - 858-12

These Pro Magnum hydraulic lifters are designed to perform at high RPM without any harmful pumping up. These lifters for Chevrolet 194-292/200-262 V6 yield significant power increase over standard hydraulic lifters.

COMP Cams Pro-Magnum Lifter SB & BB Che - 858-1

This Pro Magnum hydraulic lifter is designed to perform at higher RPM without any harmful pumping up. This lifter for Chevrolet 194-292/200-262 V6, 265-400/396-454/348-409 yields significant power increase over standard hydraulic lifters.

COMP Cams Solid Lifters Ford V8/SBC - 833-16

Designed and manufactured to the tightest tolerances, these solid lifters for Ford 302-351, Boss 302, 351C/M-400M, 429-460 and Chevrolet 265-400 Small Block feature an exactly milled oil meter band as well as precisely ground lifter faces.

COMP Cams Pushrods Hi-Tech 5/16in 8.000in - 8304-16

With .050" oil holes on the ends, these Hi-Tech 5/16" one piece 8.000" long pushrods feature an .080" wall thickness and restricts oil flow to the top end of the valvetrain.

COMP Cams Pushrod Hi-Tech 5/16in 8.000in - 8304-1

With .050" oil holes on the ends, this Hi-Tech 5/16" one piece 8.000" long pushrod features an .080" wall thickness and restricts oil flow to the top end of the valvetrain.

COMP Cams Pushrods Hi-Tech 5/16in 7.950in - 8303-16

With .050" oil holes on the ends, these Hi-Tech 5/16" one piece 7.950" long pushrods feature an .080" wall thickness and restricts oil flow to the top end of the valvetrain.

COMP Cams Pushrod Hi-Tech 5/16in 7.950in - 8303-1

With .050" oil holes on the ends, this Hi-Tech 5/16" one piece 7.950" long pushrod features an .080" wall thickness and restricts oil flow to the top end of the valvetrain.

COMP Cams Pushrods Hi-Tech 5/16in 7.900in - 8302-16

With .050" oil holes on the ends, these Hi-Tech 5/16" one piece 7.900" long pushrods feature an .080" wall thickness and restricts oil flow to the top end of the valvetrain.

COMP Cams Pushrod Hi-Tech 5/16in 7.900in - 8302-1

With .050" oil holes on the ends, this Hi-Tech 5/16" one piece 7.900" long pushrod features an .080" wall thickness and restricts oil flow to the top end of the valvetrain.