WilWood

Wilwood AERO4 Rear Kit 14.25in 2014-Up Corvette C7 w/Lines - 140-13698

AERO4 Big Brake Rear Axle Kits replace the factory disc brakes and use the OE parking brake assembly as a compliment to front big brake upgrades on late model high performance vehicles. High capacity...

Wilwood Clutch Kit - Forged Adj. Pedal / MC / Slave - Swing Mount - 7:1 - 341-15170

Wilwood’s Clutch Pedal Kit comes with a swing mount forged adjustable clutch pedal of a 7 to 1 ratio, Integral Reservoir Master cylinder in a ¾ bore and universal pull type slave cylinder in a...

Wilwood Clutch Kit - Forged Adj. Pedal / MC / Slave - Floor Mount - 6:1 - 341-15169

Wilwood’s Clutch Pedal Kit comes with a floor mount forged adjustable clutch pedal of a 6 to 1 ratio, Integral Reservoir Master cylinder in a ¾ bore and universal pull type slave cylinder in a...

Wilwood Remote Brake Bias Adjuster Cable - 340-4990

Wilwood's Remote Balance Bar Cable Adjuster is used with balance bars to adjust front-to-rear brake bias during changing race conditions. The highly visible bright blue knob features a special...

Wilwood Balance Bar Assembly w/o Tube - 340-4745

This balance bar assembly is used in all current Wilwood standard balance bar pedals and remote pedal 60 degree master cylinder mounts. It can be used to replace a damaged or worn balance bar, or to...

Wilwood 60 Degree MC Mount & Balance Bar Assembly - 340-4630

This lightweight 1.8 pound unit is ideal for dirt modifieds, champ cars, sprint Cars, midgets, or any application where the master cylinders and bias balance bar must be mounted in a remote location...

Wilwood Balance Bar Assembly W/Tube - 340-1757

This balance bar kit includes a steel sleeve to use when fabricating custom steel arm pedals. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and...

Wilwood 10:1 Pedal Assembly Dual M/C (M/C Not Included) - 340-15677

Wilwood 10:1 Pedal Assembly Dual M/C (M/C Not Included)

Wilwood Retrofit Kit Adj Trubar Brake Pedal - Brake -Rev Swing Mount - 6.25:1 - 340-15152

Wilwood's new Tru-Bar Reverse Mount Pedal Replacement Kit includes the Tru-Bar Brake pedal & trunion assembly with the appropriate hardware to retrofit earlier design forged or cast pedal assemblies...

Wilwood Retrofit Kit Adj Trubar Brake Pedal - Brake -Rev Swing Mount -5.1:1 - 340-15151

Wilwood's new Tru-Bar Reverse Mount Pedal Replacement Kit includes the Tru-Bar Brake pedal & trunion assembly with the appropriate hardware to retrofit earlier design forged or cast pedal assemblies...

Wilwood Adjustable-Trubar Brake Pedal - Dual MC - Swing Mount - 7:1 - 340-15079

Wilwood's Tru-Bar balance bar system is now available in a Forward Swing mount pedal with a 7:1 ratio. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing...

Wilwood Adjustable-Trubar Brake Pedal - Dual MC - Floor Mount - 6:1 - 340-15078

Wilwood's Tru-Bar balance bar system is now available in a Forward Floor mount pedal with a 6:1 ratio. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing...

Wilwood Adjustable-Trubar Brake Pedal - Dual MC - Rev. Swing Mount - 6.25:1 - 340-15077

Wilwood's Tru-Bar balance bar system is now available in a Reverse Swing mount pedal with a 6.25:1 ratio. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end...

Wilwood Adjustable-Trubar Brake Pedal - Rev. Swing Mount - 5.1:1 - 340-15076

Wilwood's Tru-Bar balance bar system is now available in a Reverse Swing mount pedal with a 5:1 ratio. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing...

Wilwood Adjustable-Trubar Dual Pedal - Brake / Clutch - Rev. Swing Mount -6.25:1 Brake 5.1:1 Clutch - 340-15075

Wilwood's Tru-Bar balance bar system is now available in a Reverse Swing mount pedal with a 6.25:1 ratio and 5;1 clutch. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with...

Wilwood Adjustable-Trubar Dual Pedal - Brake / Clutch - Rev. Swing Mount - 6.25:1 - 340-15074

Wilwood's Tru-Bar balance bar system is now available in a Reverse Swing mount pedal with a 6.25:1 ratio. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end...

Wilwood Adjustable-Trubar Dual Pedal - Brake / Clutch - Fwd. Swing Mount - 6.25:1 - 340-15072

Wilwood's Tru-Bar balance bar system is now available in a Forward Swing mount pedal with a 6.25:1 ratio. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end...

Wilwood 60 Degree MC Mount & Trubar Assembly - 340-14380

This Tru-bar unit is ideal for Dirt Modifieds, Champ Cars, Sprint Cars, Midgets, or any application where the master cylinders must be mounted in a remote location from the pedal. To accommodate...

Wilwood Adjustable-Tandem Dual Pedal - Brake / Clutch - Fwd. Swing Mount - 7.0:1 - Black E-Coat - 340-14361

Wilwood's new Swing Mount Tandem Brake and Clutch Assembly simplifies installing a tandem outlet, single pushrod brake master cylinder in conjunction with a hydraulic clutch master cylinder in a...

Wilwood Adjustable-Tandem Dual Pedal - Brake / Clutch - Fwd. Swing Mount - 6.25:1 - Black E-Coat - 340-14360

Wilwood's new Swing Mount Tandem Brake and Clutch Assembly simplifies installing a tandem outlet, single pushrod brake master cylinder in conjunction with a hydraulic clutch master cylinder in a...

Wilwood Adjustable Brake Pedal - Rev. Swing Mount - 5.1:1 - 340-13837

This swinging mount pedal assembly mounts two single outlet brake master cylinders in a reverse position inside the firewall. It features a lightweight aluminum frame, with a high strength reinforced...

Wilwood Adjustable Dual Pedal - Brake / Clutch - Rev. Swing Mount -6.25:1 Brake 5.1:1 Clutch - 340-13836

This swinging mount pedal assembly combines the brake and clutch pedals in one unit with the master cylinders in a reverse position inside the firewall. It features a lightweight aluminum frame, ...

Wilwood Adjustable Dual Pedal - Brake / Clutch - Rev. Swing Mount - 5.1:1 - 340-13835

This swinging mount pedal assembly combines the brake and clutch pedals in one unit with the master cylinders in a reverse position inside the firewall. It features a lightweight aluminum frame, with...

Wilwood Adjustable Single Pedal - Swing Mount - 7:1 - 340-13834

This swinging mount pedal assembly mounts a single brake or clutch master cylinder in a forward position outside the firewall. It features a lightweight aluminum frame, with a high strength...