COMP Cams

COMP Cams Crank Socket Hemi 5.7 6.1 6 - 4944-CS

The COMP crankshaft socket for Chrysler HEMI 5.7/6.1L is the last crankshaft socket that you'll need. Featuring a 1/2" drive socket and a knurled nut, our socket is designed for use with a degree...

COMP Cams Camshaft Fv6 270HR-12 - 49-422-8

Good in Explorers and Rangers with aftermarket chip. Strong torque and mid-range.This Part Fits:YearMakeModelSubmodel1990-1997FordAerostarBase1990-1994FordAerostarEddie...

COMP Cams Camshaft Fv6 256HR-12 - 49-410-8

Good upgrade for factory cam in Explorers and Rangers. Good torque and mileage. Great for towing.This Part Fits:YearMakeModelSubmodel1990-1997FordAerostarBase1990-1994FordAerostarEddie...

COMP Cams Spring SeatsFor LS 26925 - 4873-16

Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4873 features a 1.300" OD and a .520" ID.

COMP Cams Spring SeatFor LS 26925 W/.5 - 4873-1

Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4873 features a 1.300" OD and a .520" ID.

COMP Cams Spring SeatsFor LS 26918 - 4872-16

Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4872 features a 1.300" OD and a .520" ID which works well for our 26918...

COMP Cams Spring SeatFor LS 26918 W/.5 - 4872-1

Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4872 features a 1.300" OD and a .520" ID which works well for our 26918...

COMP Cams ID Spring Seats 1.350 X 515 X - 4869-16

Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4869 features a 1.350" OD and a .515" ID.

COMP Cams ID Spring Seat 1.350 X 515 X - 4869-1

Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4869 features a 1.350" OD and a .515" ID.

COMP Cams ID Spring Seats 1.350 X 515 X - 4868-16

Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4868 features a 1.350" OD and a .515" ID.

COMP Cams ID Spring Seat 1.350 X 515 X - 4868-1

Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4868 features a 1.350" OD and a .515" ID.

COMP Cams ID Spring Seat 1.300 X 570 X - 4863-1

Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4863 features a 1.300" OD and a .570" ID.

COMP Cams ID Spring Seats Gm LS7 1.270in - 4862-16

Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4862 features a 1.270" OD and a .520" ID.

COMP Cams ID Spring Seats Eb Gm LS7 1.2 - 4862-100

The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today. COMP Cams offers a simple but effective solution to this...

COMP Cams ID Spring Seat Gm LS71.270in X - 4862-1

Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4862 features a 1.270" OD and a .520" ID.

COMP Cams Spring Seats LS1 Beehive - 4861-16

Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4861 features a 1.300" OD and a .510" ID.

COMP Cams Spring Seats Eb LS1 Beehive - 4861-100

The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today. COMP Cams offers a simple but effective solution to this...

COMP Cams Spring Seat LS1 Beehive W/ .5 - 4861-1

Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4861 features a 1.300" OD and a .510" ID.

COMP Cams ID Spring Seats 1.655 X 570 X - 4860-16

Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4860 features a 1.655" OD and a .570" ID.

COMP Cams ID Spring Seats Eb 1.655 X 57 - 4860-100

The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today. COMP Cams offers a simple but effective solution to this...

COMP Cams ID Spring Seat 1.655 X 570 X - 4860-1

Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4860 features a 1.655" OD and a .570" ID.

COMP Cams Engine Valve Shim Kits - 0.15 x 1.25 - Set of 16 - 4813-16

COMP Cams Engine Valve Shim Kits - 0.15 x 1.25 - Set of 16

COMP Cams Engine Valve Shim Kits - 0.15 x 1.25 - Single - 4813-1

COMP Cams Engine Valve Shim Kits - 0.15 x 1.25 - Single

COMP Cams Camshaft C409 XE278HR10 - 48-804-11

48-804-11 - CamShaft, C409 XE278HR10