1999-2004 F-150 Lightning

COMP Cams Pro-Magnum Lifter FS/FC/FF - 862-1

This Pro Magnum lifter is designed to perform at higher RPM without any harmful pumping up. This lifter for Ford 231/240-300 6 cylinder, 289-351W, 351C/M-400M and 429-460 yields significant power increase over standard hydraulic lifters.

COMP Cams 96-04 Ford Modular 4.6L-5.4L SOC Performance Lash Adjusters - Set of 16 - 84031-16

Lash adjusters in Ford Modular engines can leak down under high RPM, causing lost duration and lift, as well as increased valve train wear. The COMP Cams Ford Modular Performance Lash Adjusters are engineered to have a slower bleed down rate compared to...

COMP Cams Link Bar For FS/LS1 Roller Li - 838-L

Roller Lifter Link Bar for GM GEN III LS1/LS2/LS6 and Ford 289-351W and SVO

COMP Cams Roller Lifters FS - 838-16

Endure-X Solid Roller Lifter Set for Ford 289-351W

COMP Cams Roller Lifter FS - 838-1

Endure-X Solid Roller Lifter for Ford 289-351W

COMP Cams Solid Lifters Ford V8/SBC - 833-16

Designed and manufactured to the tightest tolerances, these solid lifters for Ford 302-351, Boss 302, 351C/M-400M, 429-460 and Chevrolet 265-400 Small Block feature an exactly milled oil meter band as well as precisely ground lifter faces.

COMP Cams Hydraulic Lifters FS FC FF - 832-16

With a patented orifice metering valve and a lightweight check valve disc these High Energy hydraulic flat lifters for Ford 289-351W, 351C-400M and 429-460 provide quicker response and better performance.

COMP Cams Hydraulic Lifter FS FC FF - 832-1

With a patented orifice metering valve and a lightweight check valve disc these High Energy hydraulic flat lifters for Ford 240-300/231 V6, 289-351W, 351C-400M and 429-460 provide quicker response and better performance.

COMP Cams Pushrods Hi-Tech 5/16in 8.250in - 8319-16

With .050" oil holes on the ends, these Hi-Tech 5/16" one piece 8.250" long pushrods feature an .080" wall thickness and restricts oil flow to the top end of the valvetrain.

COMP Cams Pushrod Hi-Tech 5/16in 8.250in - 8319-1

With .050" oil holes on the ends, this Hi-Tech 5/16" one piece 8.250" long pushrod features an .080" wall thickness and restricts oil flow to the top end of the valvetrain.

COMP Cams Pushrods Hi-Tech 5/16in 8.200in - 8318-16

With .050" oil holes on the ends, these Hi-Tech 5/16" one piece 8.200" long pushrods feature an .080" wall thickness and restricts oil flow to the top end of the valvetrain.

COMP Cams Pushrod Hi-Tech 5/16in 8.200in - 8318-1

With .050" oil holes on the ends, this Hi-Tech 5/16" one piece 8.200" long pushrod features an .080" wall thickness and restricts oil flow to the top end of the valvetrain.

COMP Cams Pushrods Hi-Tech 5/16in 8.100in - 8316-16

With .050" oil holes on the ends, these Hi-Tech 5/16" one piece 8.100" long pushrods feature an .080" wall thickness and restricts oil flow to the top end of the valvetrain.

COMP Cams Pushrod Hi-Tech 5/16in 8.100in - 8316-1

With .050" oil holes on the ends, this Hi-Tech 5/16" one piece 8.100" long pushrod features an .080" wall thickness and restricts oil flow to the top end of the valvetrain.

COMP Cams Solid Lifter Ford W/.012 Edm - 817-16

These Performance Series solid lifters for Ford 289-351W, 351C/M-400M, 429-460 feature a precision-ground crown radius and surface finish, and an EDM oiling hole, perfect for high-end street and race engines with higher spring pressures.

COMP Cams Solid Lifter Ford W/.012 Edm - 817-12

Performance Series EDM Solid Lifter Set of 12 for Ford 6 Cylinder

COMP Cams Solid Lifter FC/FF W/.012 Edm - 817-1

This Performance Series EDM solid lifter for Ford 289-351W, 351C/M-400M, 429-460 features a precision-ground crown radius and surface finish, andan EDM oiling hole, perfect for high-end street and race engines with higher spring pressures.

COMP Cams Pushrods Hi-Tech 5/16 8.150 - 7965-16

Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 8.150" long Hi-Tech 5/16" diameter pushrods handle the requirements of today's all-out race engines.

COMP Cams Pushrod Hi-Tech 5/16 8.150 - 7965-1

Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, this 8.150" long Hi-Tech 5/16" diameter pushrod handles the requirements of today's all-out race engines.

COMP Cams Steel Retainers For Beehive S - 795-16

Precision machined from chromemoly steel then black oxided, these 10 degree retainers are designed specifically for engines using our 26120 or 26986 Beehive valve springs.

COMP Cams Steel Retainers Eb For Beehive - 795-100

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs. COMP Cams steel retainers are precision machined from chromemoly steel and finished in black oxide. These precision retainers are specifically...

COMP Cams Steel Retainer For Beehive - 795-1

Precision machined from chromemoly steel then black oxided, this 10 degree retainer is designed specifically for engines using our 26120 Beehive valve spring.

COMP Cams Pushrod Set FS 351W High Energy - 7835-16

Exceeding OE specifications, this High Energy 8.152" long pushrod set works perfectly with High Energy or Magnum rockers. Factory length for '69-'78 Ford 351 Windsor.

COMP Cams Pushrod FS 351W High Energy - 7835-1

Exceeding OE specifications, this High Energy 8.152" long pushrod works perfectly with High Energy or Magnum rockers. Factory length for '69-'78 Ford 351 Windsor.