1994-1998 Mustang

Edelbrock Retainers 5822 5857 5867 V/S - 9724

Edelbrock #9724 Valve Spring Retainers are for #5822/5857/5867 Valve Springs. They work with 11/32" Valve Stems and 7 Deg Locks. They feature a black oxide finish to prevent rust & corrosion. Set of 16

Edelbrock 7/16 Head Bolt Bushing (20 Pcs) - 9680

Edelbrock #9680 Head Bolt Bushings with Integral Washers must be used on 289-302 S/B Ford Engines with 7/16" Head Bolts. Complete Set of 20 High Quality Head Bolt Bushings. Use with Edelbrock Head Bolt Kit #8552 or Stock 7/16" Head Bolts.

Edelbrock Pushrod Set Retro-Fit Hyd Roler Appl SBF 289/302 - 9658

Edelbrock part #9658 Pushrods are designed for small-block Ford 289-302 V-8 engine applications. These one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum durability. They have...

Edelbrock Pushrod Set Hydraulic Roller Applications Small Block Ford 289/302 - 9655

Edelbrock part #9655 Pushrods are designed for small-block Ford 289-302 V-8 engine applications. These one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum durability. They have...

Edelbrock S/B Ford Push Rods (6 812Inol) - 9632

Edelbrock part #9632 Pushrods are designed for small-block Ford 289-302 V-8 engine applications. These one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum durability. They have...

Edelbrock Pulley Water Pump for Use On 8896 GM Gen IIi And Gen IV V8 Water Pump - 8898

The 8898 is a hard anodized billet aluminum water pump pulley. This pulley is designed to work with our 8896 LS water pump. This pulley is a universal type design that will work with belt offsets of most GM Gen III and Gen IV small block V8 engines (LS...

Edelbrock Water Pump High Performance Ford 1996-01 Mustang GT/Cobra 2005-10 Mustang GT Long Style - 8804

The Edelbrock part #8804 Long Water Pump designed for Ford 4.6L V8 Mustangs is ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using State-Of-The-Art Racing Technology, Edelbrock has designed these...

Eibach Pro-Spacer 45mm Spacer / Bolt Pattern 5x114.3 / Hub Center 70.5 for 94-04 Ford Mustang (SN95) - S90-4-45-001

Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of...

Eibach Pro-Spacer 35mm Spacer / Bolt Pattern 5x114.3 / Hub Center 70.5 for 94-04 Ford Mustang (SN95) - S90-4-35-001

Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of...

Eibach Pro-Spacer 30mm Spacer / Bolt Pattern 5x114.3 / Hub Center 70.5 for 94-04 Ford Mustang (SN95) - S90-4-30-005

Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of...

Edelbrock 289-302 Ford Head Bolt - 8552

The Edelbrock #8552 bolt kit contain a complete set of the highest quality head bolts and hardened washers available. Cold-formed to ensure molecular integrity and heat treated prior to thread rolling and machining. Reduced diameter bolt heads eliminate...

Eibach Pro-Spacer 25mm Spacer / Bolt Pattern 5x114.3 / Hub Center 70.5 for 94-04 Ford Mustang (SN95) - S90-4-25-010

Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of...

Edelbrock Univ Fuel Line Kit - 8135

The Edelbrock Universal Fuel Hose & Filter Kit #8135 is designed for quick installation when retaining part of the stock steel fuel line, simply cut the stock line and install the compression fitting. Use supplied neoprene hose, clamp and special fuel...

Edelbrock 27-Inch Fuel Line Kit - 8127

This Edelbrock #8127 Stainless Steel Braided Fuel Kit connects mechanical fuel pumps with 1/2" NPT outlets to Edelbrock Fuel Pressure Regulator Kits. Made of the highest quality materials. Pre-assembled hose with hose ends.

Edelbrock 22-Inch Fuel Line Kit - 8122

This Edelbrock Stainless Steel Braided Fuel Kit #8122 connects mechanical fuel pumps with 1/2" NPT outlets to Edelbrock Fuel Pressure Regulator Kits. Made of the highest quality materials. Pre-assembled hose with hose ends.

Edelbrock Dual Feed Fuel Line - 8101

This Edelbrock Fuel Line Kit #8101 is temperature, gas and oil resistant. This kit is made from reinforced synthetic Chlorinated Polyethylene rubber hose with a nylon inner braid for strength. Features a -6 AN inlet fitting and a 1/8" pipe fitting with...

Edelbrock Dual Quad Fuel Line Kit In Clr/Blk Finish - 80913

The Edelbrock ProClassic Fuel Hose Kit #80913 supplies fuel to two Edelbrock carbs when used on Edelbrock Dual-Quad manifolds. Use with a fuel hose kit such as our #8122 or #8127. 6-7/16" center-to-center, 1/8"-NPT fuel pressure port and a 3/8"-NPT fuel...

Edelbrock Dual Quad Fuel Line Kit - 8088

The Edelbrock Fuel Hose Kit #8088 supplies fuel to two Edelbrock carbs when used on Edelbrock Dual-Quad manifolds. Use with a fuel hose kit such as our #8122 or #8127. 6-7/16" center-to-center, 1/8"-NPT fuel pressure port and a 3/8"-NPT fuel inlet.

Edelbrock Ford 2-Bbl Egr Adapter - 8057

Edelbrock part #8057 is a 1" tall Ford 2V EGR adapter plate kit. Includes mounting hardware.

Edelbrock Accu-Drive Gear Drive S/B Ford 65-84 - 7892

Edelbrock part #7892 Accu-Drive camshaft gear drive kit for small-block Ford engines replaces a stock timing chain with a precision gear drive system utilizing a compound gear drive train. The gear drive can be easily installed. Just replace the stock...

Edelbrock Timing Chain And Gear Set Ford Sng/Keyway - 7814

Edelbrock part #7814 Performer-Link timing chain is for use with Edelbrock or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. Cam sprockets are made from 35,000 psi tensile...

Edelbrock Timing Chain And Gear Set Late SB Ford - 7811

Edelbrock part #7811 Performer-Link timing chain is for use with Edelbrock or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. Cam sprockets are made from 35,000 psi tensile...

Edelbrock SBF Valve Cover Gasket - 7560

The Edelbrock valve cover gaskets #7560 provide excellent sealing integrity and conformability for easy installation. The multi-layer construction has two highly compressible, high rubber content, fiber-reinforced outside layers which are chemically...

Edelbrock SBF Head Gasket Set - 7364

The Edelbrock #7364?head gaskets provide the best sealing solution and are matched to Edelbrock cylinder heads for optimal performance. Edelbrock relies on industry leading head gasket manufactures to ensure our head gasket sets will provide the best fit...