Rocker Arms

COMP Cams Rocker Arm Pedestal Ultra GOL - 4662-8

These pedestals replace the pedestals that come with our 19028/19029 Ultra-Gold ARC rockers for GM LS3/L92.This Part...

COMP Cams Max-Lift BSR Shaft Rocker Kit Chevy LS3 - 1982-16

COMP Cams is proud to announce another industry first: a bolt-in-ready Bushed Shaft Rocker System for GM LS engines. Thanks to innovative engineering, this patent pending Bushed Shaft Rocker System increases valve train stability and durability while...

COMP Cams Rocker Arm inUltra Goldsin LS3 1 - 19029-16

Constructed in the USA after FEA analysis, the Ultra Gold ARC rocker withstands up to 700 lbs pressure while improving power and stability. These 19029 rockers feature a 1.82 ratio for use with pedestal mount Chevrolet LS3/L92.This Part...

COMP Cams Rocker Arm Ultra Golds Arc LS3 - 19028-16

Constructed in the USA after FEA analysis, the Ultra Gold ARC rocker withstands up to 700 lbs pressure while improving power and stability. These 19028 rockers feature a 1.72 ratio for use with pedestal mount Chevrolet LS3/L92.This Part...

COMP Cams Rocker Arms Gm LS3 1.8 Bolt D - 1678-16

These Ultra Pro Magnum rockers are made of black oxide coated 8650 chromemoly steel that can withstand up to 850 lbs of spring pressure. Featuring a 1.8 ratio, these rockers fit non-adjustable pedestal mount LS3.This Part...

COMP Cams Rocker Arm Gm LS3 1.8 Bolt Do - 1678-1

This Ultra Pro Magnum rocker is made of black oxide coated 8650 chromemoly steel that can withstand up to 850 lbs of spring pressure. Featuring a 1.8 ratio, this rocker fits non-adjustable pedestal mount LS3.This Part...

COMP Cams Rocker Arm KitLS3 1.8 5/16 - 16765-KIT

Convert your LS3 engine to an adjustable valvetrain with the Ultra Pro Magnum Rocker Kit. Our kit includes 1.8 Ultra Pro Magnum Rockers, guideplates, 3/8" studs, adjusting nuts and set screws for a complete adjustable valvetrain solution.This Part...

COMP Cams Rocker ArmsGm LS3 1.8 3/8 Ult - 1676-16

These Ultra Pro Magnum rockers are made of black oxide coated 8650 chromemoly steel that can withstand up to 850 lbs of spring pressure. Featuring a 1.8 ratio, these rockers fit LS3 with a 3/8" diameter stud.This Part...

COMP Cams Rocker Arm Gm LS3 1.8 3/8 Ult - 1676-1

This Ultra Pro Magnum rocker is made of black oxide coated 8650 chromemoly steel that can withstand up to 850 lbs of spring pressure. Featuring a 1.8 ratio, this rocker fits LS3 with a 3/8" diameter stud.This Part...

Comp Cams GM LS3 Upgraded OEM Rocker Arms - 1478-16

With upgraded trunnions that are secured by snap rings along with a black oxide finish, our upgraded OE LS rockers offer higher lift capacity than stock. Featuring a 1.7 ratio, these 1478 rockers fit LS3 engines.This Part...

COMP Cams Trunion Kit1/2inUpm Type Rockr - 13706-KIT

Upgrade your Ultra Pro Magnum and Ultra Pro Magnum XD rockers to 1/2" studs with this kit. Complete with trunnions, bearings, snap rings, polylocks and studs, this kit can upgrade any of our Ultra Pro Magnum/XD rockers.

COMP Cams GM LS OEM Rocker Arm Upgrade Kit & Installation Tool - 13702TL-KIT

Our trunnion upgrade kit converts a stock LS series rocker arm into a captured trunnion for increased stability and stiffness. Compatible with stock geometry, our trunnion kit can be performed in 30 minutes with included 54702-TL tool.

COMP Cams Rocker Arm Bearing LS-Type Re - 137022

This bearing is required to upgrade the trunnions in GM LS rocker arms. Requires 32 for complete set of rockers. Set of 32 comes with every 13702-KIT and 13702TL-KIT.

COMP Cams Rocker Arm Trunion LS-Type Re - 137021

Upgraded Trunnion for GM LS1, LS3 and LS7 Rocker Arms

COMP Cams Trunion Kit LS-Type Rocker Retrofit - 13702-KIT

Our trunnion upgrade kit converts a stock LS series rocker arm into a captured trunnion for increased stability and stiffness. Compatible with stock geometry, our trunnion kit can be performed in 30 minutes with a C-clamp or a bench vise.