Leaf Springs & Accessories

Fabtech 15-19 Toyota Tacoma 2WD/4WD 6 Lug 1.5in Replacement Spring Pack - FTS26091

Bring your vehicle back up to its original height with the help of the Add-A-Leaf kit. This kit has all the performance you need. Designed to be strong yet flexible. You get the smoothest ride possible. That means that your wheels hug the road better...

MaxTrac Rear U-Bolts for 3in/4in Lift Blocks - 12.50in x 2.625in x 9/16in - Set of 4 - 910104

Set of (4) U-bolts with thick nuts and washers. Specs are 2.63in. ID x 12.50in. long square end.

MaxTrac Rear U-Bolts for 2in Lift Blocks - 10.00in x 2.625in x 9/16in - Set of 4 - 910102

Set of (4) U-bolts with thick nuts and washers. Specs are 2.63in. ID x 10.00in. long square end.

MaxTrac Rear U-Bolts for 1in/1.5in Lift Blocks - 8.75in x 2.622in x 9/16in - Set of 4 - 910101

Set of (4) U-bolts with thick nuts and washers. Specs are 2.63in. ID x 8.75in. long square end.

ICON 1996+ Toyota Tacoma / 00-06 Toyota Tundra 1.5in Add-A-Leaf Kit - 51100

This 3 Leaf Progressive Add a Leaf Kit comes complete with U-bolts and Center pins for an easy install. This add a leaf kit will give your Tacoma / Tundra 1.5 inches of lift after installation. Just remove the factory overload and say good bye to that...

ICON 2005+ Toyota Tacoma Multi Rate RXT Leaf Pack w/Add In Leaf - 158505

To take advantage of the additional travel that the RXT Rear Suspension System offers, ICON engineers had to scrap the OE leaf springs and develop a replacement that addressed issues found in the R&D process. The result is a user-adjustable multi-rate...

Skyjacker Leaf Spring 2011-2013 Toyota Tacoma 4 Wheel Drive - TCR515S

Softride® springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring...

Skyjacker Add A Leaf 2005-2010 Toyota Tacoma 4 Wheel Drive 5 Lug Wheel - RTC515

Softride® Add-a-leafs use only American steel and are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the leaf. Without this shot-peening...