Air Intake Systems

Airaid 15-23 Ford Mustang 2.3L L4 Performance Air Intake System - 454-326

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. Some AIRAID MXP Air Intakes start with a...

aFe Momentum GT Pro 5R Intake System 15-16 Ford Mustang L4-2.3L EcoBoost - 54-73201

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of...

aFe MagnumFORCE Stage-2 Pro 5R Cold Air Intake System 15-17 Ford Mustang EcoBoost 2.3L (t) - 54-12822

This intake represents true race-inspired technology. The intake housing and top is constructed from fully fabricated black anodized 6061 aluminum for light weight and maximum flow. The CAD designed intake tubes are engineered for maximum flow, velocity...

aFe Momentum GT Pro Dry S Intake System 15-16 Ford Mustang L4-2.3L EcoBoost - 51-73201

aFe is proud to introduce the all new Momentum sealed intake system for the 2012-2014 BMW M5 (F10) with the V8-4.4L twin-turbo engine. This all new Momentum intake system produced up to 28hp and 31lbs. x ft. torque and outflows the factory intake by 29%...

aFe Momentum GT Pro Dry S Cold Air Intake 18-19 Ford Mustang Ecoboost L4-2.3L - 50-70050D

Emissions Disclaimer:This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.This Part...

aFe Momentum ST Pro DRY S Intake System 15-17 Ford Mustang EcoBoost I4-2.3L - 50-40008D

The smooth one-piece sealed housing is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. This System uses a CAD designed, dyno-tuned, roto-mold intake tube to achieve maximum power gains while...

Mishimoto 2015 Ford Mustang EcoBoost 2.3L Intercooler Polished Pipe and Boot Kit - MMICP-MUS4-15P

"Looking for a way to improve spool-up, increase power potential, and improve engine bay aesthetics on your EcoBoost Mustang? Mishimoto has you covered with a new intercooler pipe kit designed specifically for the 2015+ Ford Mustang EcoBoost. This...

Mishimoto 2015 Ford Mustang EcoBoost 2.3L Intercooler Hot Side Wrinkle Black Pipe and Boot Kit - MMICP-MUS4-15HWBK

Looking for a way to improve spool-up, increase power potential, and improve engine bay aesthetics on your EcoBoost Mustang? Mishimoto has you covered with a new hot-side intercooler pipe designed specifically for the 2015+ Ford Mustang EcoBoost. This...

Mishimoto 2015 Ford Mustang EcoBoost 2.3L Intercooler Cold Side Wrinkle Black Pipe and Boot Kit - MMICP-MUS4-15CWBK

Looking for a way to improve spool-up, increase power potential, and improve engine bay aesthetics on your EcoBoost Mustang? Mishimoto has you covered with a new cold-side intercooler pipe designed specifically for the 2015+ Ford Mustang EcoBoost. This...

Mishimoto 2015 Ford Mustang EcoBoost 2.3L Intercooler Cold Side Polished Pipe and Boot Kit - MMICP-MUS4-15CP

Looking for a way to improve spool-up, increase power potential, and improve engine bay aesthetics on your EcoBoost Mustang? Mishimoto has you covered with a new cold-side intercooler pipe designed specifically for the 2015+ Ford Mustang EcoBoost. This...

Mishimoto 2015 Ford Mustang Ecoboost Performance Intake - Wrinkle Black - MMAI-MUS4-15WBK

Mishimoto has developed a performance air intake engineered specifically for the 2015+ Ford Mustang Ecoboost. The intake features numerous innovative components, including a wire-reinforced turbo inlet hose that will not collapse under suction and boost,...

Mishimoto 2015 Ford Mustang Ecoboost Performance Intake - Polish - MMAI-MUS4-15P

Mishimoto has developed a performance air intake engineered specifically for the 2015+ Ford Mustang Ecoboost. The intake features numerous innovative components, including a wire-reinforced turbo inlet hose that will not collapse under suction and boost,...

K&N 2018 Ford Mustang L4-2.3L F/I Aircharger Performance Intake - 63-2606

The K&N 63-2606 AirCharger air intake system replaces the restrictive factory air filter and air intake housing on some Ford Mustang models. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air...

K&N 18-19 Ford Mustang L4-2.3L 57 Series FIPK Performance Intake Kit - 57-2606

57-series OEM air box intake systems include a washable, reusable High-Flow Air Filter paired with a CAD-designed high airflow intake tube, and is designed to be a simple, cost-effective performance upgrade. The included oiled cotton filter is a direct...

K&N 2015 Ford Mustang L4-2.3L 57 Series FIPK Performance Intake Kit - 57-2589

The K&N 57-2589 Fuel Injected Performance Kit (FIPK) air intake system replaces the restrictive factory air filter and air intake housing on some Ford Mustang models. K&N air intakes are designed to dramatically reduce air intake restriction as well as...

JLT 15 - 22 Mustang 2.3L EcoBoost Cold Air Intake Kit with Snap-In Lid (No Tuning Required) - CAI-75-5143

JLT 15 - 22 Mustang 2.3L EcoBoost Cold Air Intake Kit with Snap-In Lid (No Tuning Required)

Injen 2015 Ford Mustang Eco Boost 2.3L Wrinkle Black CAI Converts To SRI - PF9091WB

Does your ride need some excitement added to it? Of course it does and why would that ever be a question?! Well, you're in luck because the engineers at Injen Technology have you covered. Check out this Injen PowerFlow (PF) intake to fulfill all of your...

Injen 2015 Ford Mustang Eco Boost 2.3L Polished CAI Converts To SRI - PF9091P

Does your ride need some excitement added to it? Of course it does and why would that ever be a question?! Well, you're in luck because the engineers at Injen Technology have you covered. Check out this Injen PowerFlow (PF) intake to fulfill all of your...

Injen 15-19 Ford Mustang EcoBoost 2.3L L4 Evolution Intake - EVO9203

Durable Rotomolded intake tube: The EVO9203 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. This tube utilizes our patented MR Technology for accurate fuel...

Ford Racing 15-17 Mustang 2.3L EcoBoost 70mm Billet Throttle Body - M-9926-M2370

Ford Racing Hi-Flow throttle bodies provide more air and power than stock throttle bodies, while also providing good drivability and low-speed control. They are built with high-quality aluminum castings and accept all stock sensors and controls.This Part...

Ford Racing 15-21 Mustang GT I4/V6 High-Flow K&N/Ford Performance Air Filter - M-9601-M

These air filter elements from Ford Racing are the same filters as those used in Ford Racing cold air induction kits. The filters are constructed from multi-layer high performance cotton gauze that traps more dirt and has less restriction than...

Corsa 2015-2017 Ford Mustang EcoBoost 2.3T Sport 3in Cat-Back Dual Rear Exit Polished Tips - 14343

CORSAs Patented Reflective Sound Cancellation(R) (RSC) Technology allows acoustic engineers to create a drone free exhaust sound, styled specifically to fit the personality of your vehicle. Each system is designed to increase vehicle performance, deliver...

BBK 2015-16 Mustang Ecoboost Cold Air Induction System (Blackout Finish) - 18505

Since 1988 the BBK Performance brand has been synonymous with bolt on performance for modern muscle cars and trucks since its beginning in 1988. In fact it was our founders Brian & Ken Murphy that designed and developed the first aftermarket air intake...

BBK 2015-16 Mustang Ecoboost Cold Air Induction System (Chrome) - 1850

Since 1988 the BBK Performance brand has been synonymous with bolt on performance for modern muscle cars and trucks since its beginning in 1988. In fact it was our founders Brian & Ken Murphy that designed and developed the first aftermarket air intake...